Kitchen Remodeling - Easy and Affordable With Do It Yourself Flooring

One affordable way to add extra flair to any kitchen remodeling project is with new vinyl flooring, either as part of a larger renovation plan, or a stand alone DIY project.

Modern vinyl sheet goods are available in countless styles and colors; some which replicate other types of flooring. Such as ceramic or stone tile, or even hardwood. With state-of-the-art manufacturing techniques that make it difficult to discern from the real thing at first glance.

To begin a do it your self flooring project, careful measurements must be taken. This will insure an adequate amount of vinyl flooring is purchased in the style and color of choice.

Step 1 Begin by Removing Old Flooring

Remove moldings and baseboards from around the perimeter of the room. Remove old flooring to prepare the surface:

Vinyl

Cut old vinyl flooring into 12-inch wide strips using a utility knife. Grab hold of an edge and pull up the strips by hand. Gripping as close to the floor as possible will help avoid tearing.

Stubborn pieces should be cut into narrower strips; 5-inches or so. Apply a mixture of water and detergent under the top layer to separate the backing.

For particularly tough pieces, scrape with a floor scraper or a wallboard knife. Sweep debris with a broom; use a shop vac for small debris and dust.

Carpet

Cut carpet loose from metal edging strips using a utility knife. Cut remaining carpet into strips narrow enough to handle easily, and then roll carpet strips up and remove.

Carpet pad will either be stapled or glued. Simply pull up stapled pad and remove; pull staples out of the floor and sweep the area. If the pad is glued, pull it up. Stubborn pads must be scraped with a floor scraper. Remove metal edging using a pry bar. Once the floor is scraped smooth, sweep up the debris.

Vinyl Tiles

Simply scrape off vinyl tiles using a floor scraper. Stubborn tiles can be softened with a heat gun, and pried off with a wallboard knife. Be sure and scrape off any remaining adhesive. Wet stubborn adhesive with a water and detergent mixture, and then scrape with a floor scraper.

Ceramic Tile

Knock ceramic tile loose with a hand maul and masonry chisel. Try to start in a grout line where grout is already cracked or loosened. Be especially careful when working around fixtures or drain flanges. Scrape any remaining adhesive with a floor scraper. Stubborn adhesive may need to be removed with a belt sander using a coarse grit.

Step 2 Preparing the Surface

If you plan to reuse the old sub-floor surface, it must be very smooth, level, and free from any debris. When it comes to installing vinyl sheet flooring, even the slightest imperfection will show through.

If floor needs slight leveling, apply leveling compound using a smooth trowel. Be careful not to leave ridges; they need to be sanded smooth.

Moderately to heavily uneven and rough sub flooring should be covered with -inch plywood underlayment, available in 4X4-foot panels. Start the first run along a wall across the room.

Stagger subsequent runs so that seams are at least 18-inches from the other, from one run to the next. Staple or screw the underlayment to the sub floor using fasteners. Space the fasteners about 6-inches around the perimeter of the underlayment, and about 8-inches apart elsewhere.

Door jambs may need adjustment so that underlayment and vinyl will tuck under them; close, but not tight. Accomplish this by undercutting using an undercut saw.

Step 3 Make a Pattern

Using 15-pound asphalt felt paper, make a pattern of the floor by placing pieces of the felt around the room. Carefully trim edges to match the contour of the room; tape pieces together with duct tape.

Carefully roll or fold the pattern and remove from the room. In another room or in an area large enough roll out the sheet flooring with vinyl face up. Place the pattern on top and trace; cut the vinyl to fit the pattern. If in doubt, leave a small margin on the vinyl, which can be custom trimmed later.

Step 4 Install the Sheet Vinyl

Lay the vinyl in place, and do any necessary final trimming. Once vinyl is trimmed for a good fit, carefully fold the vinyl back over on its self so that of the room sub floor is exposed.

Apply a layer of floor adhesive to the sub floor or underlayment using a -inch notched trowel. Carefully fold the vinyl over on to the glued side of the room, and roll with a heavy floor roller; available at most rental stores. Using a floor roller will help to work out air bubbles and create a smoother, firmer bond to the sub floor. Repeat procedure for the other side of the room.

Once vinyl is glued, replace baseboards and moldings. Install new metal edge trim where vinyl meets carpet or other flooring.

If this new sheet vinyl kitchen remodeling process sounds like more than you would like to tackle as a DIY project, you might consider hiring a professional flooring contractor to help with all or just part of the project.

If, instead of sheet vinyl you are considering having hardwood flooring installed in your kitchen, refer to this helpful article: Exotic Hardwood Flooring; Worth the Extra Cost or Not? Note links at the bottom of the page for other articles relevant to kitchen remodeling and new flooring.

For more articles on kitchen remodeling, kitchen cabinets and many others, visit HandyAmerican.com. Your one stop online resource for home renovation and landscaping articles. And a great asset for finding just the right service provider to help with all your remodeling needs. With free project posting services for homeowners requiring the services of a reliable contractor in their locality.

Vinyl Kitchen Flooring: Why you Should Install Vinyl Floors in your Kitchen
Vinyl kitchen flooring is a very popular choice by homeowners. Vinyl kitchen flooring offers many benefits to the homeowner ...

Save Money With Laminate Flooring
Laminate flooring is the answer for spills, messes, and cleaning up that mess. You will find many grades of laminate flooring...

The Enduring Beauty of Hardwood Flooring
Hardwood kitchen flooring has many advantages like how if items are dropped on it they do not shatter, it is attractive, and ...

Install Laminate Flooring for Fun or Profit
Laminate flooring adds class and style at a fraction of the cost. If you would like to have the look of a real wood, but not ...

Give Your Place a New Look with Carpet Flooring
Remodeling your home is a huge task. Well, it is inevitable that at some point or the other you would want to change the look...

Consider Garage Flooring To Transform A Forgotten Space
For any of us who own a home, we have all come up against the decisions associated with choosing new flooring. Whether were p...

Kitchen Flooring and the Making of a Home
Home is where the heart is. This idiom continues to reverberate, with almost certainty, the importance of home and family in...

Vinyl Plank Flooring - A Less Expensive Substitute For Hardwood Floors
One of the best things that can be said for vinyl plank flooring or any kind of vinyl flooring is that it is extremely easy t...

Linoleum Flooring Choices Made Easy
Linoleum flooring is a very popular choice when looking for style and ease on the budget. You can choose from many linoleum f...

The Visual Impact of Slate Kitchen Flooring
Slate is a metamorphic rock, and is defined as a lavered stone that can be split into thicknesses ranging from 8 to 14 mm. T...

Discount Flooring - Options on a Budget
If you have ever priced flooring then you know how expensive it can be. Hardwood flooring, for example, can be as expensive a...

Choosing a Flooring Style For Your Home
Flooring can be a great way to update or change the look of your home. Depending upon the style of flooring you choose, it c...

How To Install Hardwood Flooring
Hardwood flooring is an increasingly popular choice in flooring over the traditional carpet or laminate flooring. There are a...

The Many Advantages of DuPont Flooring
Finding the right flooring company to help you with redecorating the home can be frustrating. With so many different companie...

How to Clean Laminate Flooring
After installing your laminate floors the next thing that you need to learn about is how to clean laminate floors. The first ...

Simple Flooring Choices Make Sense
A huge variety of flooring is available in the market. Vinyl flooring and laminate flooring are said to be the floorings of e...

The Basics of Oak Flooring
The style, color and materials of flooring defines the styles and atmosphere of a home. When you go to a design center to wo...

The Worst Places To Install Carpet
Carpet is a great choice in flooring. It is relatively inexpensive, comfortable and attractive. There are some places in your...

Wood Flooring
While choosing a flooring material, there are lots of things to consider like the style, design, colour, easy maintenance, pr...

Slate Tile Flooring - Selecting The Right One For Your Home
More and more slate tile flooring is being used in many residential as well as commercial interiors and exteriors simply beca...